In the Fourslide Multi Slides Stamping process, tempering is an important post-treatment step used to improve the mechanical properties and durability of Fourslide Multi Slides Parts made from this stamping process.
The main purpose of tempering treatment is to eliminate or reduce the residual stress and brittleness generated by Fourslide Multi Slides Parts during the stamping process, while maintaining a certain degree of hardness and strength. The following are some key points and effects of tempering treatment:
Eliminating residual stress: During the stamping process, Fourslide Multi Slides parts are subjected to strong plastic deformation, resulting in residual stress inside. These stresses may cause deformation or cracking of the parts during subsequent use. Tempering treatment releases internal stresses in the material through heating and insulation processes, thereby improving the dimensional stability and reliability of the parts.
Adjusting hardness and toughness: The selection of tempering temperature and time will affect the hardness and toughness of Fourslide Multi Slides Parts. Higher tempering temperatures usually lead to a decrease in hardness and an increase in toughness, while lower tempering temperatures may maintain higher hardness but poorer toughness. By selecting appropriate tempering parameters, the hardness and toughness of the parts can be adjusted according to their specific application requirements.
Improving wear and corrosion resistance: Tempering treatment can also improve the wear and corrosion resistance of parts. Proper tempering treatment can optimize the microstructure of Fourslide Multi Slides Parts, reduce internal defects, and thereby improve the wear resistance and corrosion resistance of the parts.
Extending service life: By eliminating residual stress and improving the mechanical properties of materials, tempering treatment can significantly extend the service life of Fourslide Multi Slides Parts. This helps to reduce the frequency of component damage and replacement, and lower maintenance costs.
Heat treatment in Fourslide Multi Slide Stamping is a process used to improve the properties of metal materials. The purpose of heat treatment generally includes the following:
Improve hardness and strength: through proper heating, insulation and cooling process, change the microstructure of metal to increase its hardness and strength, so that the stamping parts can better withstand the pressure and wear in use.
Improvement of toughness and fatigue resistance: While increasing hardness, improve the toughness of materials, reduce brittleness and prevent fracture or fatigue failure of stamping parts during repeated use.
Optimize elastic property: adjust the elastic property of the material to make it have more suitable resilience and lasting elasticity.
Elimination of internal stress: the internal stress generated in the manufacturing process may cause deformation or cracking of the stamping parts, and the heat treatment can effectively eliminate these internal stresses and improve the dimensional stability and reliability.